小型實驗研究用納米干式粉碎機 超微粉碎機
● For developing new materials
● Dispersion of nano-size particles
● Ideal for making small quantity samples
More about NANO GETTER
Model | DMS65 |
Motor | 2.2kW |
Grinding Chamber Volume | 0.13L |
Batch Quantity | 0.2L~0.5L |
Bead Diameter | φ0.05mm~0.5mm |
● Grinding and dispersion to the nano and submicron size
● The smallest size available in the standard mill LMZ series
● Micro beads can be used
● Evenly ground and dispersed particles achieved
More about LMZ
Model | MINICER |
Motor | 0.94kW |
Grinding Chamber Volume | 0.16L |
Batch Quantity | 0.2L~0.5L |
Bead Diameter | φ0.1mm~1.0mm |
● Grinding and dispersion to the nano and submicron size
● Desktop laboratory type that is a size bigger than MINICER
More about LMZ
Model | LMZ06?LMZ075 |
Motor | 3.7kW |
Grinding Chamber Volume | 0.6L (LMZ), 0.75L (LME) |
Batch Quantity | 2L ~ |
Bead Diameter | φ0.1mm~1.0mm |
● Possible to operate with minimum batch quantity among laboratory series
● Easy maintenance with simple structure
Model | MINIZETA |
Motor | 0.75kW |
Grinding Chamber Volume | 0.3L |
Batch Quantity | 0.25L~0.5L |
Bead Diameter | φ0.3mm~1.0mm |
工作原理:
研磨部分在設備的底部,進料通過研磨介質產生的強烈沖擊和摩擦進行研磨。氣流從底部側面進入,經過研磨介質時可以冷卻顆粒,同時顆粒也被氣流從研磨區帶到分級區。滿足要求的細粉將會通過分級輪,剩下的大顆粒將會返回研磨區繼續研磨。
應用:
PULVIS 特別適合于難于研磨的溫敏材料。
在研磨過程中還可加入添加劑。
典型的應用如下:
- 電池材料 (陰極材料)
- 無機顏料
- 陶瓷材料
- 金屬氧化物
- 工業礦物
- 玻璃,玻璃粉
- 金屬氧化物(充電電池材料)
- 磁性材料(惰性氣體保護)
- 石墨(鋰電池陽極)
耐磨保護:
研磨部分和分級部分都可以使用陶瓷材料。
深圳市秋山貿易有限公司版權所有 地址:深圳市龍崗區龍崗街道新生社區新旺路和健云谷2棟B座1002